Memorex MiHTS3202 User Guide - Page 14

INSERTING AN IPOD 1 2 (B) (A) Rotate the iPod compartment as shown. Insert the Universal Dock included with your iPod (A) into the iPod compartment (B) (as shown), making sure the tabs are facing front, and slip the tabs into place. Press the rear side of the Universal Dock until it is positioned inside the iPod compartment. NOTE: You cannot use the iPhone or iShuffle with this unit. Slide the iPod into the Universal Dock (as shown). Gently push down so the connector on the iPod slides onto the connector on this unit. 3 Insert the iPod onto the holder. Gently push down so the connector on the iPod slides onto the connector on the unit. If the unit is turned off, once you connect the iPod, "iPod" will appear briefly in the display and then enter Standby mode. Press the STANDBY/ON button to turn the unit ON. Press the FUNCTION button to select the iPod mode. NOTES: • CHARGING: When the iPod is inserted into the dock, the iPod's battery will charge until it is full. • When the iPod is connected to this unit, it will be in the Pause mode. • To remove the Universal Dock, insert your finger (or other object) into the gap in the Universal Dock, then gently pull the Universal Dock out to remove it. 14