Miele CVA 2662 Operating and Installation manual - Page 53

Coffee results, The coffee is too weak.

Get Miele CVA 2662 PDF manuals and user guides View all Miele CVA 2662 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Frequently asked questions Coffee results The dispensed coffee has ground coffee in it. Possible fault Solution The capsule plate is soiled. Clean the capsule plate, see "Cleaning and Care". The water flow stopped while the quantity was being programmed. Possible fault Solution - If the maximum water amount is reached, the water dispensing stops automatically. The maximum water amount is saved. - There was not enough water in the tank. The dispensed water amount will not be saved. - Refill the water tank and reset the serving size. The preparing time and amount of coffee is very different. Depending on coffee type the grind level will differ between coarse and fine. Preparing time and amount will vary. The espresso / coffee is not hot enough. Possible fault Solution - Check if the capsule plate is clogged. - Clean the capsule plate. - Pre-warm the cup. The coffee is too weak. Possible fault Solution - Check the water amount saved in the - Adjust if necessary. memory per coffee. - After 15,000 cups of coffee the - See "Cleaning and care - perforator needs to be replaced. Maintenance". 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Coffee results
The dispensed coffee has ground coffee in it.
Possible fault
Solution
The capsule plate is soiled.
Clean the capsule plate, see "Cleaning
and Care".
The water flow stopped while the quantity was being programmed.
Possible fault
Solution
– If the maximum water amount is
reached, the water dispensing stops
automatically. The maximum water
amount is saved.
– There was not enough water in the
tank. The dispensed water amount
will not be saved.
– Refill the water tank and reset the
serving size.
The preparing time and amount of coffee is very different.
Depending on coffee type the grind level will differ between coarse and fine.
Preparing time and amount will vary.
The espresso / coffee is not hot enough.
Possible fault
Solution
– Check if the capsule plate is
clogged.
– Clean the capsule plate.
– Pre-warm the cup.
The coffee is too weak.
Possible fault
Solution
– Check the water amount saved in the
memory per coffee.
– After 15,000 cups of coffee the
perforator needs to be replaced.
– Adjust if necessary.
– See "Cleaning and care -
Maintenance".
Frequently asked questions
53