Miele CVA 2662 Operating and Installation manual - Page 56

Removing a jammed capsule 56, What if, appears in the display?, If the carousel tray could be pulled

Get Miele CVA 2662 PDF manuals and user guides View all Miele CVA 2662 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

Removing a jammed capsule ,Turn the machine off at the main switch in the upper left corner. Danger of electric shock. The machine must be turned off before performing the next steps. What if F 72 appears in the display? A capsule has jammed between the capsule plate and the capsule carousel. ^ Open the appliance door. Turn off the appliance with the main switch. ^ Attempt to pull out the carousel tray. If the carousel tray could be pulled out, remove and dispose of the damaged capsule. ^ Clean the carousel tray niche. Thoroughly clean the sensor and the recess in the floor. Dry with a soft cloth. ^ Return all parts to the machine, then use the main switch to turn the appliance back on again. ^ Close the door. If the carousel cannot be pulled out : ^ Attempt to remove the capsule plate. ^ Look into the brew unit, attempt to remove and dispose of the damaged capsule. ^ Push in the capsule plate. ^ Return all parts to the machine, then use the main switch to turn the appliance back on again. ^ Close the door and follow the instructions in the display. If the fault still appears in the display or the damaged capsule could not be removed easily, contact Technical Service. 56

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
,
Turn the machine off at the main switch in the upper left corner. Danger of
electric shock. The machine must be turned off before performing the next
steps.
What if
F 72
appears in the display?
A capsule has jammed between the
capsule plate and the capsule
carousel.
^
Open the appliance door.
Turn off the appliance with the main
switch.
^
Attempt to pull out the carousel tray.
If the carousel tray could be pulled
out,
remove and dispose of the
damaged capsule.
^
Clean the carousel tray niche.
Thoroughly clean the sensor and the
recess in the floor. Dry with a soft
cloth.
^
Return all parts to the machine, then
use the main switch to turn the
appliance back on again.
^
Close the door.
If the carousel cannot be pulled out :
^
Attempt to remove the capsule plate.
^
Look into the brew unit, attempt to
remove and dispose of the damaged
capsule.
^
Push in the capsule plate.
^
Return all parts to the machine, then
use the main switch to turn the
appliance back on again.
^
Close the door and follow the
instructions in the display.
If the fault still appears in the display or
the damaged capsule could not be
removed easily, contact Technical
Service.
Removing a jammed capsule
56