Miele DAR 1230 Set 18 Operating instructions - Page 14

Description of functions, Vented mode with internal blower DRIB, Recirculating mode

Page 14 highlights

Description of functions The following functions are available on Recirculating mode your ventilation hood, depending on the model: (with conversion kit DRUU) Vented mode with internal blower DRIB A blower mounted in the ventilation hood draws in the air. The air is cleaned by the baffle filter and conveyed out of of the building. The baffle filter and the additional additional charcoal filter clean the indrawn air. Then the air is recirculated to the kitchen. Vented mode with external blower DREB The exhaust blower is mounted outside the room in a location of your choice. The external blower is connected to the ventilation hood by a cable and is controlled by the ventilation hood controls. The indrawn air is cleaned by the baffle filters and conveyed out of the building. 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

Description of functions
14
The following functions are available on
your ventilation hood, depending on the
model:
Vented mode with internal
blower DRIB
A blower mounted in the ventilation
hood draws in the air. The air is cleaned
by the baffle filter and conveyed out of
of the building.
Vented mode with external
blower DREB
The exhaust blower is mounted outside
the room in a location of your choice.
The external blower is connected to the
ventilation hood by a cable and is
controlled by the ventilation hood
controls. The indrawn air is cleaned by
the baffle filters and conveyed out of
the building.
Recirculating mode
(with conversion kit DRUU)
The baffle filter and the additional
additional charcoal filter clean the
indrawn air. Then the air is recirculated
to the kitchen.