Miele DAR 1230 Set 18 Operating instructions - Page 27
plugs, 8 x 50 mm, screws
View all Miele DAR 1230 Set 18 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Installation a 1 vent collar for exhaust duct 9 3/4" (250 mm). The vent collar is not used for recirculation mode. b 1 mounting rail for mounting the DAR 12xx on a wall c 2 mounting brackets for mounting the DAR 12xx on a wall d 2 cover caps 2 self-locking screws, M6 x 16 mm for attaching the DAR 12xx to the mounting rail. 4 screws, M4 x 11 mm with base and 3 screws, 5 x 60 mm and 3 plugs, 8 x 50 mm for attaching to the wall (DAR 12xx only). Plugs not for use in USA / CDN. The screws and plugs are designed for use in solid walls only. Use different fasteners for other wall construction types. Make sure that the wall can support the load. 2 clamps for securing the DRDC and DRUU duct Covers (DAR 12xx only). 10 screws, M4 x 8 mm for fastening the cover caps and the clamps (DAR 12xx only). 4 screws, 5 x 35 mm for securing the DAR 11xx Range Hood. Keep the following in a safe place: MontagIenstallaMtioonntajMeontagMgoionterMinogntagAesmennus Installation plan 27