Miele DAR 1230 Set 18 Operating instructions - Page 30

Distance between cooktop and ventilation hood (S), SAFETY INSTRUCTIONS

Page 30 highlights

Installation DRDC duct covers, DRUU recirculation conversion kits a Minimum height required for exhaust air penetration when using a vent duct. b Recommended installation area for the electrical connection. c Attachment points: there must be a sub-construction capable of bearing the load in the area of the attachment point. d The vent collar is not used for recirculation mode. Distance between cooktop and ventilation hood (S) Provided a larger distance is not given by the manufacturer of the cooktop, follow the minimum safety distances between a cooktop and the bottom of the hood. Please also observe the information contained in the "IMPORTANT SAFETY INSTRUCTIONS" section.  Also observe the manufacturer's information regarding the distance from combustible materials, e.g. to wall units. Duct covers can also be mounted above recirculation kit. 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

Installation
30
DRDC duct covers,
DRUU recirculation conversion kits
Duct covers can also be mounted
above recirculation kit.
a
Minimum height required for exhaust
air penetration when using a vent
duct.
b
Recommended installation area for
the electrical connection.
c
Attachment points: there must be a
sub-construction capable of bearing
the load in the area of the
attachment point.
d
The vent collar is not used for
recirculation mode.
Distance between cooktop and
ventilation hood (S)
Provided a larger distance is not
given by the manufacturer of the
cooktop, follow the minimum safety
distances between a cooktop and
the bottom of the hood.
Please also observe the information
contained in the "IMPORTANT
SAFETY INSTRUCTIONS" section.
Also observe the manufacturer's
information regarding the distance
from combustible materials, e.g. to
wall units.