Miele G 4970 SCVi Product Manual - Page 19

Setting the rinse aid dosage, button 3 times.

Get Miele G 4970 SCVi PDF manuals and user guides View all Miele G 4970 SCVi manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Before using for the first time Setting the rinse aid dosage You can adjust the rinse aid dosage for best results. The rinse aid dosage is set in stages from 0 to 6. It is set to 3 at the factory. This is the recommended setting. The dosage can turn out to be higher than the set value due to the automatic adjustment of the Automatic program. If spots appear on dishware and glass‐ ware:  Increase the rinse aid dosage. If clouding or smearing appears on dishware and glassware:  Decrease the rinse aid dosage.  Turn the dishwasher off with the  button, if it is turned on.  Press the program selection button , and, simultaneously switch the dishwasher on using the  button. Keep the program selection button  pressed in for at least four seconds until the lower right program indicator light comes on. If this does not happen, start the proce‐ dure from the beginning again.  Press the  button 3 times. The  indicator light will flash 3 times at short intervals. The set value will appear in the display after . The flashing sequence   will appear in the display. This indicates a factory default setting of 3.  Use the program selection button  to select the setting required. Each press of the button moves you up a level. The setting is now stored in memory.  Turn the dishwasher off with the  button. 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
Before using for the first time
19
Setting the rinse aid dosage
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage is set in stages
from 0 to 6. It is set to 3 at the factory.
This is the recommended setting.
The dosage can turn out to be higher
than the set value due to the automatic
adjustment of the
Automatic
program.
If spots appear on dishware and glass‐
ware:
Increase the rinse aid dosage.
If clouding or smearing appears on
dishware and glassware:
Decrease the rinse aid dosage.
Turn the dishwasher off with the
button, if it is turned on.
Press the program selection button
, and,
simultaneously
switch the
dishwasher on using the
button.
Keep the program selection button
pressed in for at least four seconds
until the lower right program indicator
light comes on.
If this does not happen, start the proce‐
dure from the beginning again.
Press the
button 3 times.
The
indicator light will flash 3 times
at short intervals.
The set value will appear in the display
after
.
The flashing sequence
 
will appear in
the display.
This indicates a factory default setting
of 3.
Use the program selection button
to select the setting required.
Each press of the button moves you
up a level.
The setting is now stored in memory.
Turn the dishwasher off with the
button.