Miele G 4970 SCVi Product Manual - Page 44
Factory default settings, The flashing sequence in the display in‐
View all Miele G 4970 SCVi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Options Factory default settings If you have altered any settings from the factory default, you can reset them back to the factory default settings as follows: Open the door. Turn the dishwasher off with the button, if it is turned on. Press the program selection button , and, simultaneously switch the dishwasher on using the button. Keep the program selection button pressed in for at least four seconds until the lower right program indicator light comes on. If this does not happen, start the proce‐ dure from the beginning again. Press the button 19 times. The indicator light will flash once at a long interval and then 9 times at short intervals. The flashing sequence in the display in‐ dicates whether a setting has been changed from its factory default All settings are set to factory de‐ fault settings - : At least one setting has been changed To reset the dishwasher to the factory default settings, press the program selection button . The setting is now stored in memory. Turn the dishwasher off with the button. 44