Miele K 1801 Vi Operating and Installation manual - Page 38
Furniture/fixtures, Ventilation, Installation niche - dimensions
![]() |
View all Miele K 1801 Vi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Installation Base Ventilation A fully loaded appliance is very heavy. The load-bearing capacity of your floor must meet the following requirements: K 18x1 Vi 996 lbs (452 kg) The air intake and outlet must not be blocked or covered in any way. They also need to be dusted/cleaned on a regular basis. K 19x1 Vi 1,191 lbs (540 kg) To ensure that the appliance is installed securely and functions properly, the base must be flat, level and made of a hard, rigid material. If in doubt, contact Miele. Furniture/fixtures The new appliance will be mounted securely to adjacent and overhead furniture/fixtures. For this reason it is essential that all attachable furniture/fixtures are connected securely to the base or the wall by suitable means. Installation niche To ensure safe, trouble-free installation and the best possible cosmetic result, check to be sure that the installation space complies with the installation dimensions. See "Niche dimensions". The side walls of the installation cavity must be plumb. The minimum thickness of the side walls and the top wall must be 5/8" (16 mm). The minimum thickness of the toe-kick panel must be ½" (13 mm). A thickness of 3/4" (19 mm) is recommended. 38
![](/manual_guide/products/miele-k-1911-vi-operating-installation-manual-36366d3/38.png)