Miele K 1801 Vi Operating and Installation manual - Page 46
Aligning the housing unit, Check the installation niche, Before installation
![]() |
View all Miele K 1801 Vi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Installing the appliance Aligning the housing unit Check the installation niche To ensure a safe, trouble-free installation and the best possible cosmetic result, check to be sure that the installation space complies with the installation requirements. The housing unit must be carefully aligned using a spirit level before installing the appliance. The unit corners must be at right angles, as otherwise the furniture door will not align correctly with the 4 corners of the appliance. - The side panels of the housing must be even. - The housing unit panels must be at least 5/8" (16 mm) thick. - The plinth facing must be at least 1/2" (13 mm) thick, preferably 3/4" 19 mm). ^ Check the base (see "Installation"). ^ Check the dimensions of the cavity. ^ Check that the cavity is square. ^ Check the location of the power outlet. ^ Check that all furniture parts in the vicinity of the appliance are securely connected to the wall. ^ Check that the adjacent furniture/fixtures do not collide with the open door. Before installation ,Caution - the appliance is very heavy. Use caution when unpacking and opening the door, danger of tipping. ^ To protect the base from damage during installation, attach a hard board, linoleum, etc., to the floor in front of the intended installation location. ^ Remove any cable clips from the back of the appliance. ^ Take the supplied accessories out of the protective packaging. 46
![](/manual_guide/products/miele-k-1911-vi-operating-installation-manual-36366d3/46.png)