Miele K 1801 Vi Operating and Installation manual - Page 56
Preparing the custom door 56, overhead furniture/fixtures.
View all Miele K 1801 Vi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Installing the appliance Preparing the custom door ^ Open the appliance door. ^ Unscrew the installation supports n from the appliance door. ^ Loosen the remaining screws from the strips o on each side of the door, then remove. ^ Set aside the screws and side strips o - you will need them again later. ^ Remove the light switch cover (see arrow). ^ Close the appliance door. ^ Measure the distance X between the bracket from the door and the overhead furniture/fixtures. ^ Loosen the two nuts. Set aside the nuts - you will need them again later. ^ With the inside facing up, lay the custom door on a stable surface (to avoid scratch marks, place some plastic or a cloth on the surface). 56
Preparing the custom door
^
Open the appliance door.
^
Unscrew the installation supports
n
from the appliance door.
^
Loosen the remaining screws from
the strips
o
on each side of the door,
then remove.
^
Set aside the screws and side strips
o
- you will need them again later.
^
Remove the light switch cover (see
arrow).
^
Close the appliance door.
^
Measure the distance
X
between the
bracket from the door and the
overhead furniture/fixtures.
^
Loosen the two nuts.
Set aside the nuts - you will need
them again later.
^
With the inside facing up, lay the
custom door on a stable surface (to
avoid scratch marks, place some
plastic or a cloth on the surface).
Installing the appliance
56