Miele T 8023 C Operating and Installation manual - Page 17
Emptying the condensed water container 16, supplied yellow tool.
 |
View all Miele T 8023 C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Dryer care Cleaning the condenser ,To reduce the risk of electric shock, disconnect the dryer from the power supply by shutting off the power main, tripping the circuit breaker or unplugging the power cord before performing maintenance. ^ Clean the condenser every 6 months and when the "Filter/Vent" indicator lights. Clean approximately every 100 uses when the dryer is used often. ^ Turn the condenser door lock down and remove the door up and out. Removing the condenser The access panel to the condenser is located on the lower left corner of the dryer. ^ Turn the condenser lock up. ^ Open the access panel with the supplied yellow tool. ^ Remove the panel up and out of the condenser access area. ^ Pull out the condenser. 17
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20 -
21 -
22 -
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
 |
 |
Cleaning the condenser
,
To reduce the risk of electric
shock, disconnect the dryer from the
power supply by shutting off the
power main, tripping the circuit
breaker or unplugging the power
cord before performing
maintenance.
^
Clean the condenser every 6 months
and when the "Filter/Vent" indicator
lights. Clean approximately every
100 uses when the dryer is used
often.
Removing the condenser
The access panel to the condenser is
located on the lower left corner of the
dryer.
^
Open the access panel with the
supplied yellow tool.
^
Remove the panel up and out of the
condenser access area.
^
Turn the condenser door lock down
and remove the door up and out.
^
Turn the condenser lock up.
^
Pull out the condenser.
Dryer care
17