Miele T 8023 C Operating and Installation manual - Page 18
Rinsing the condenser, front of the condenser is flush
View all Miele T 8023 C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Dryer care Rinsing the condenser Returning the Condenser ^ Put the condenser back in place in the reverse order. Check that the gasket around the front of the condenser is flush and not crimped. ^ To prevent leaks, make certain the condenser is pushed in all the way and locked in place. ^ Restore power. ^ Rinse the condenser along the left side with warm water. ^ Rinse the condenser from the front with warm water. ^ Check the condenser for visible soiling. Rinse the condenser until clean. ^ Place the condenser lengthwise on a towel to air dry. 18
Rinsing the condenser
^
Rinse the condenser along the left
side with warm water.
^
Rinse the condenser from the front
with warm water.
^
Check the condenser for visible
soiling. Rinse the condenser until
clean.
^
Place the condenser lengthwise on a
towel to air dry.
Returning the Condenser
^
Put the condenser back in place in
the reverse order.
Check that the gasket around the
front of the condenser is flush and
not crimped.
^
To prevent leaks, make certain the
condenser is pushed in all the way
and locked in place.
^
Restore power.
Dryer care
18