Miele W 4842 Operating and Installation manual - Page 5
Technical safety, GROUNDING INSTRUCTIONS - washing times
View all Miele W 4842 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
IMPORTANT SAFETY INSTRUCTIONS Technical safety ~ Do not install or use a washer with visible damage. ~ Before connecting the machine, ensure that the connection data on the data plate (fusing, voltage and frequency) match the mains electrical supply. If in doubt contact an electrician. ~ GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment- grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. ~ WARNING - Improper connection of the equipment-grounding conductor may result in a risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the appliance is properly grounded. ~ Do not modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician. ~ Do not use an extension cord to connect this appliance to the power supply. Extension cords do not guarantee the required safety of the appliance (e.g. danger of overheating). ~ Faulty components must only be replaced with genuine Miele spare parts. ~ Installation, repair and maintenance work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and may void the warranty. ~ Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in these operating instructions. ~ If the power cord is damaged it must only be replaced by a Miele Service technician with a genuine Miele power cord. ~ Before servicing, cleaning or in the event of a fault, disconnect the appliance from the main power supply. ~ Only use a new hose kit to connect the washer to the water supply. Old hosing should not be re-used. ~ Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, turn on all hot water faucets and let the water flow from each for several minutes before using the washing machine. This will release any built-up hydrogen gas. Do not smoke or use an open flame during this time, the gas is flammable. ~ Before the appliance is removed for service or discarded, remove the door. 5