Motorola WS-2000-SME-WW CLI Guide - Page 156
Network WAN set Command
View all Motorola WS-2000-SME-WW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
3-120 WS2000 Wireless Switch System Reference Guide 3.23.2 Network WAN set Command set Network WAN Commands Sets the WAN parameters. In the Web interface, this functionality if provided by the Network->WAN screen. Syntax set [dhcp|dgw|dns|ipadr|mask|mode|ppope|mtu] Parameters dhcp Enables or disables the switch as a DHCP client. can be one of enable or disable. dgw Sets the default gateway IP address to . dns Sets the IP address of one or two DNS servers, where indicates either the primary (1) or secondary (2) server, and is the IP address of the server. ipadr Sets up to 8 (using from 1 to 8) IP addresses for the WAN interface of the switch. mask Sets the subnet mask to . mode Enables or disables the WAN interface associated with the given (1- 8) as set using the set ipadr command. can be one of enable or disable. pppoe [idle|ka|mode|passwd| Sets PPPoE parameters. type|user|mss] • idle - Sets the PPPoE idle value (1-65535) seconds. • ka - Sets the PPPoE keep alive mode (enable, disable). • mode - Enables or disables PPPoE. can be one of enable or disable. • passwd - Sets the PPPoE password to (1 - 39 Characters) • type - Sets the PPPoE authentication type to (none, pap/ chap, pap, chap). • user - Sets the PPPoE user name to (1 - 47 Characters). • mss - Sets the PPPoE maximum segment size to (20-1460). mtu Sets MTU size of wan interface. The minimum value is 128 bytes and maximum is 1500 bytes. Example admin(network.wan)>set dhcp enable admin(network.wan)>set dgw 192.168.122.25 admin(network.wan)>set pppoe mode enable admin(network.wan)>set pppoe type chap admin(network.wan)>set pppoe user JohnDoe admin(network.wan)>set pppoe passwd @#$goodpassword%$#