Motorola WS-2000-SME-WW CLI Guide - Page 389
System SNMP Traps add Command
View all Motorola WS-2000-SME-WW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 389 highlights
System CLI Commands Reference 4-79 4.18.1 System SNMP Traps add Command add System SNMP Traps Commands Adds SNMP traps. Syntax add [v1v2c|v3] add v1v2c add v3 Parameters v1v2c v3 Adds an SNMP v1/v2c trap entry. • - The destination IP address • - The destination UDP port number. • - The community (1-31 characters) • - The SNMP version number. (v1 or v2) Adds an SNMP v3 trap entry. • - The destination IP address • - The destination UDP port number. • - The username (1-31 characters). • - The security type. is set to one of none, auth, or auth/priv. The following parameters must be specified if is set to auth/priv: • - The authentication algorithm. Can be one of md5 or sha1. Must be set if is set to auth or auth/priv. • - The password (8-31 characters) for authentication. Must be provided if is set to auth or auth/priv. • - The privacy algorithm. Set to des or aes. Must be set if is set to auth/priv. • - Privacy password (8-31 characters). Must be provided if is set to auth/priv. Example admin(system.snmp.traps)>add v1v2 203.223.24.2 333 mycomm v1 admin(system.snmp.traps)>list v1v2c index dest ip dest port community version 1 203.223.24.2 333 mycomm v1 admin(system.snmp.traps)>add v1v2 209.255.32.1 334 jumbo v2 admin(system.snmp.traps)>list v1v2c index dest ip dest port community version 1 203.223.24.2 333 mycomm v1 2 209.255.32.1 334 jumbo v2