Motorola WS-2000-SME-WW CLI Guide - Page 326
System Config set Command
View all Motorola WS-2000-SME-WW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 326 highlights
4-16 WS2000 Wireless Switch System Reference Guide 4.4.5 System Config set Command set System Configuration Commands Sets the import/export parameters. Syntax set [server|user|passwd|file|cfgpath|fw|sensor-fw|import-enc-password| bind-interface|ap300] set server set user set passwd set file set cfgpath set fw [file|path|boot|active-partition] set fw file set fw path set fw boot [on-board-flash|compact-flash] set fw active-partition [primary|secondary] set sensor-fw [file|path|max-size] set sensor-fw file set sensor-fw path set sensor-fw max-size set import-enc-password set bind-interface set ap300 [file|path|max-size|legacy-mode] Parameters server user passwd file cfgpath fw [ file | path | boot [on-board-flash| compact-flash]| active-partition [primary|secondary] Sets the FTP/TFTP server IP address to in the format a.b.c.d. Sets the FTP user name to (up to 47 characters). Sets the FTP password to (up to 39 characters). Sets the configuration file name to (up to 39 characters). Sets the configuration file path to (up to 31 characters) Sets the firmware information for the device. • file - Sets the firmware filename to (up to 39 characters). • path - Sets the firmware file path to (up to 39 characters). • boot [on-board-flash|compact-flash] - Sets the firmware boot device to either the on board flash (on-board-flash) or the compact flash card (compactflash) attached to the WS 2000 Wireless Switch. • active-partition [primary|secondary] - Sets the active partition on the compact flash card to either of primary or secondary.