Mr. Coffee BVMC-ABX39 User Manual - Page 6

Before First Use or After Long Storage, SETTING, THE CLOCK, SETTING DELAY BREW TIME

Page 6 highlights

Before First Use or After Long Storage Make sure your first cup of coffee is as good as can be by cleaning your Mr. Coffee® coffeemaker before its first use. Just follow these simple steps: Figure 1 1 Wash the Carafe, Carafe lid, Removable Splash Guard, Reusable Filter (if included) and the Removable Filter Basket in a mixture of mild detergent and water. (Figure 1) Rinse each part and the Water Filtration Frame Figure 2 2 Run a brew cycle with water only. Do not add coffee, paper or reusable filter. Make sure the Carafe and Removable Filter Basket are securely in place and close the Front Loading Figure 3 3 When brewing is complete, turn the coffeemaker off, discard the water in the Carafe and rinse the Carafe, Carafe lid, Removable Splash Guard and Removable Filter Basket. (Figure 3) and Disk (if included) Brew Basket door. in water thoroughly. (Figure 2) (Refer to the PARTS DIAGRAM section) Your coffeemaker is now ready to use. Enjoy! CAUTION: Do not place or immerse cord, plug, or appliance in water or other liquid. SETTING THE CLOCK 1 Plug power cord into a standard electrical outlet. (Figure 4) The digital clock flashes "AM 12:00" indicating the time needs to be set. 10 Figure 4 2 To change the time, press the Hour and Minute buttons until you reach the current time. (Figure 5) Figure 5 The clock is now set! SETTING DELAY BREW TIME: Important: You must set the clock before using this feature. Pressing the Delay Brew button before setting the clock will result in the clock keeping time from 12:00 a.m. 3 Refer to steps 1-8 in the BREWING COFFEE NOW section for instructions on adding water and coffee to the coffeemaker. Figure 6 Figure 7 4 Refer to BREWING COFFEE LATER 1 Press the Delay Brew button. 2 Press the Delay Brew button again to section for more information on The Delay Brew accept the time. The brewing coffee at a indicator light will Delay Brew indicator later time. flash and the digital light will remain lit. clocks flashes The coffeemaker 5 To check the preset "12:00 AM". To set is now set to time while Delay desired brew time, automatically brew Brew is active, press press the Hour and coffee at the preset the Delay Brew Minute buttons. later time.(Figure 7) button twice. The (Figure 6) Delay Brew indicator TIP: If you wait a few seconds to press the button, the display changes back to current time of day. will flash and the clock will display the preset time the coffeemaker is set to brew coffee. (Figure 8) Note: To check the Delay Brew time when it is not active (Delay Note: To cancel Delay Brew once it is set, press the Delay Brew button Brew indicator light is not lit) press the Delay Brew button once. once and the Delay Brew indicator light will turn Figure 8 off.(Figure 8) 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14

Before First Use or After Long Storage
Make sure your first cup of coffee is as good as can be by cleaning your
Mr. Coffee
®
coffeemaker before its first use. Just follow these simple
steps:
Figure 1
Figure 2
1
Wash the Carafe,
Carafe lid, Removable
Splash Guard, Reusable
Filter (if included) and
the Removable Filter
Basket in a mixture
of mild detergent and
water. (Figure 1) Rinse
each part and the
Water Filtration Frame
and Disk (if included)
in water thoroughly.
(Refer to the PARTS
DIAGRAM section)
2
Run a brew cycle
with water only.
Do not add coffee,
paper or reusable
filter. Make sure
the Carafe and
Removable Filter
Basket are securely
in place and close
the Front Loading
Brew Basket door.
(Figure 2)
Figure 3
3
When brewing is
complete, turn the
coffeemaker off,
discard the water in
the Carafe and rinse
the Carafe, Carafe
lid, Removable
Splash Guard and
Removable Filter
Basket. (Figure 3)
Your coffeemaker is now ready to use. Enjoy!
SETTING
THE CLOCK
Figure 4
Figure 5
1
Plug power cord into a
standard electrical outlet.
(Figure 4) The digital
clock flashes “AM 12:00”
indicating the time needs
to be set.
2
To change the time,
press the Hour and
Minute buttons until
you reach the current
time. (Figure 5)
The clock is
now set!
SETTING DELAY BREW TIME:
Figure 6
1
Press the Delay
Brew button.
The Delay Brew
indicator light will
flash and the digital
clocks flashes
“12:00 AM”. To set
desired brew time,
press the Hour and
Minute buttons.
(Figure 6)
Figure 8
3
Refer to steps 1-8
in the BREWING
COFFEE NOW
section for
instructions on
adding water
and coffee to the
coffeemaker.
Figure 7
2
Press the Delay
Brew button again to
accept the time. The
Delay Brew indicator
light will remain lit.
The coffeemaker
is now set to
automatically brew
coffee at the preset
later time.(Figure 7)
4
Refer to BREWING
COFFEE LATER
section for more
information on
brewing coffee at a
later time.
Important:
You must set the clock before using this feature. Pressing
the Delay Brew button before setting the clock will result in the clock
keeping time from 12:00 a.m.
TIP:
If you wait a few
seconds to press the
button, the display
changes back to
current time of day.
CAUTION:
Do not place
or immerse cord, plug, or
appliance in water or other
liquid.
5
To check the preset
time while Delay
Brew is active, press
the Delay Brew
button twice. The
Delay Brew indicator
will flash and the
clock will display
the preset time
the coffeemaker is
set to brew coffee.
(Figure 8)
Note:
To cancel Delay
Brew once it is set, press
the Delay Brew button
once and the Delay Brew
indicator light will turn
off.(Figure 8)
Note:
To check the
Delay Brew time when
it is not active (Delay
Brew indicator light is
not lit) press the Delay
Brew button once.
10
11