Mr. Coffee BVMC-ABX39 User Manual - Page 9

Using the Water Filtration System Congratulations! You are the owner of a MR.COFFEETM water filtration system. This carbonbased water filter improves the taste of your coffee by removing up to 97% of the chlorine from the water you use to brew your coffee. Before using, look for the Mr. CoffeeTM Water Filtration Friendly symbol on the bottom of your filter basket. If you do not see this symbol, please call 1-800-672-6333. If you see the symbol, follow these steps to use your filter: Red Indicator 1 Align the red indicator on the frame to the letter that corresponds with the month that you are using the disk for the first time. This serves to remind you to change the disk every month (approx. 30 brewing cycles). 3 To replace the water filter disks: slide the used disk from your water filtration system. To insert the new disk, slide disk into the frame. 2 When you are done brewing your coffee, rinse the water filter with fresh water. Do not put your water filter in the dishwasher. Water Filtration Disk Replacement: Your water filtration disk will need to be replaced once a month (approx. 30 brew cycles). If the machine will not be in use for an extended period of time, rinse the water filter with running water and clean the coffeemaker before use. Replacement water filtraton frames part number:189274 and disks can be purchased online at www.mrcoffee.com or by calling 1-800-MRCOFFEE(1-800-672-6333) in the U.S. or 1-800-667-8623 in Canada. Note: This coffeemaker uses Water Filtration Grey Frame part number 189274. Frame Filter Disk 16 Strong/1-4 Cup Button Select the Strong/1-4 Cup button to give any cup size a bolder taste. It is ideal for brewing 1-4 cups because it slows down the water flow to extract the water evenly over a smaller amount of coffee, which enhances strength and flavor for smaller batches. The result is bolder, more full-bodied cup of coffee. To activate, press the Strong/1-4 Cup button. Note:This feature must be activated before you press Select/Off button to activate Brew Now. You cannot turn on/off this feature once brewing has started. The coffeemaker will remain in Strong/1-4 Cup mode until you change it back to regular strength by pressing the Strong/1-4 Cup button again, or until you unplug the coffeemaker. Presoak Feature This feature presoaks your coffee with water to release more flavor. The effect is similar to the pour-over artisan coffee-making process "blooming", which fully extracts your grounds to create a fuller, richer taste. The Fresh Brew™ Timer Feature The Fresh Brew™ Timer tracks the freshness of coffee since the last brew. The timer automatically activates at the start of the brewing cycle. Press the Fresh Brew™ Timer button once and the clock will change to display the amount of time that has passed since brewing started. Push again to display current time. (Figure 22) Note: The Brew Now indicator light must be lit for the Fresh Brew™ Timer feature to operate. The clock time and the Delay Brew time will not be displayed when the fresh brew time is displayed. Figure 22 17