NEC E437Q User Manual English - Page 36

11. No Signal Menu First : When the current video Select how long the No Signal input signal is not present, the message will display. Off / monitor searches for a video 10 seconds / 30 seconds / signal from another video input 1 minutes / 5 minutes / 10 port. minutes / 15 minutes If a video signal is present in the 12. USB2 Stanby Power Select On to keep supply power to USB 2 port during Auto Power save or Auto Standby mode. other input, the monitor switches from the current video source to this active video source automatically. The monitor will not look for any 13. RGB Options (Only available for VGA input, other video signals while the current video source is present. and when there is VGA signal input) Custom : Sets the priority of input signals. When CUSTOM is [Auto Adjust] Automatically adjust the image selected, the monitor searches on preset inputs only. settings such as position. [H. Position] Adjust horizontal position. 15. HDMI Signal Option Select EDID option according your own source devices. [V. Position] Adjust vertical position. If screen popup no audio message or no image display, [Clock] Set to the minimum level if noise please change this option to standard. occurs. Standard Display regular quality [Phase] Eliminate flicker and distortion. [Reset RGB Options] Reset RGB options to factory default settings. 14. Input Detection Triggered by the signal loss of current input source, the system will switch among the input HDMI format such as 4K 30Hz or FHD HDMI contents from source devices with HDCP 1.4. Professional Display high quality HDMI format such as 4K 60Hz and HDR contents from source devices with HDCP 2.2. 16. System Info Indicate the display information. sources in order (First) or by priorities pre-defined by user (Custom). None / First / Custom None : The Monitor will not 17. Reset AV & Setup Reset all Audio, Video, and Setup settings to factory default settings. search for signals at the other video input ports. English-34