NEC E437Q User Manual English - Page 54
Controlling the LCD TV via RS-232C Remote Control
View all NEC E437Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Controlling the LCD TV via RS-232C Remote Control This LCD TV can be controlled by connecting a personal computer with an RS-232C (reverse type) terminal. Connection LCD TV + computer. • Please turn off the monitor's main power when connecting a computer to the monitor. • Please turn on the connecting computer first then turn on the monitor's main power. If you turn on the computer and monitor in reverse order, the com port may not work. 2 Computer 2 LAN IN (Out) RS-232C Cable NOTE: If your computer is equipped only with a 25-pin serial port connector, a 25pin serial port adapter is required. Contact your supplier for details. For the pin assignment, please see "2) RS-232C input/output" on page 53. Communication procedure Send the control commands from the PC via the RS-232C connector. The TV operates according to the received command and sends a response message to the PC. Do not send multiple commands at the same time. Wait until the PC receives the response before sending the next command. 1) Interface Protocol Baud rate Data length RS-232C 9,600 bps 8 bits English-52