NEC EX341R Users Manual - Page 15

English Controls OSD (On-Screen Display) control keys on the front of the monitor function are as follows: To access OSD menu, touch any of the control keys. To change signal input, touch the INPUT/SELECT key. NOTE: Exit OSD in order to change signal input. 1 Ambient Light Sensor Human Sensor 2 INPUT/SELECT 3 MENU/EXIT 4 LEFT/RIGHT 5 UP/DOWN 6 /RESET 7 Power 8 Power LED Detects the level of ambient lighting and the presence of a user, allowing the monitor to make adjustments to various settings resulting in a more comfortable viewing experience. Do not cover this sensor. Enters the OSD menu. Enters OSD sub menus. Changes the input source when not in the OSD menu. You can directly change to L/B (LOW BLUE LIGHT) mode by touching the INPUT key for 3 seconds or more. Accesses OSD menu. Exits the OSD sub menu. Exits OSD menu. Navigates to the left or right through the OSD menu. You can adjust the USB SELECTION directly by touching RIGHT while the OSD menu is off.*1 Navigates up or down through the OSD menu. You can adjust the BRIGHTNESS directly by touching UP while the OSD menu is off.*1 You can adjust the VOLUME directly by touching DOWN while the OSD menu is off.*1 Resets the OSD controls back to factory settings. Selects MULTI PICTURE when OSD menu is off*2. Turns the monitor on and off. Indicates that the power is on or off. *1 When Hot Key function is OFF, this function is disabled. *2 MULTI PICTURE menu. Touch the LEFT/RIGHT to select a priority (adjustable) screen. When MULTI PICTURE is OFF, a single screen will be displayed. English-13