NEC FZ110A Installation Guide - Page 4

3 DISCONNECT the computer power cord and remove the cover. (Refer to your computer manualif removalis unclear.) On some computers (especially tower models), you may need to remove the computer's face plate as well as the cover in order to access the drive bays. [WARNING] Always disconnect computer electrical power at power source before beginning a computer hardware change. ■ Use the screw driver fitting for the screw. 4 Identify the IDE interface connection you want to use for the Zip ATAPI drive. • If the computer has an IDE hard drive, there may be an available connection on the primary IDE interface cable. • If there are two drives connected to the primary IDE cable, connect the Zip ATAPI drive on the secondary IDE channel or use an IDE interface card. • If there is not an existing IDE interface cable with an available connection, you will need a standard 40-pin IDE interface cable for connecting the Zip ATAPI drive. 2