NEC LCD1810 MultiSync LCD1810 Setup Sheet - Page 13
Controls cont. - multisync manual
UPC - 050927216145
View all NEC LCD1810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Controls cont. • To deactivate the LOCK OUT mode, simultaneously press the PROCEED and button. AUTO Auto Adjust MultiSync® LCD1810™ monitor only Automatically adjusts the Image Position, H. Size and Fine settings. MultiSync LCD2010™ monitor only Automatically adjusts the Image Position and H. Size settings. Position Controls H. POSITION Controls Horizontal Image Position within the display area of the LCD. V. POSITION Controls Vertical Image Position within the display area of the LCD. AUTO AUTO Automatically sets the Horizontal and Vertical Image Position within the display area of the LCD. Image Adjust Controls H. SIZE Adjusts the horizontal size by increasing or decreasing this setting. FINE Improves focus, clarity and image stability by increasing or decreasing this setting. NOTE: The Image Adjust Fine control must be used to complete the setup of your MultiSync LCD2010 monitor. MultiSync LCD1810 monitor only Automatically adjusts the H Size and Fine settings. MultiSync LCD2010 monitor only Automatically adjusts the H Size setting. AccuColor´® Control System Five color presets select the desired color setting. Each color setting is adjusted at the factory. R,G,B: Increases or decreases Red, Green or Blue color depending upon which is selected. The change in color will appear on screen and the direction (increase or decrease) will be shown by the bars. Tools OSM H POS. OSM V POS. You can choose where you would like the OSM™ control window to appear on your screen. Selecting OSM Location allows you to manually adjust the position of the OSM control menu left, right, up or down. 78133813.wpc 11 13 10/28/99, 3:22 PM