NEC NC2402ML Installation Manual - Page 118
LCD Menu, 4-1. List of Menu
View all NEC NC2402ML manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
4. LCD Menu This chapter describes the menus displayed in the LCD screen on the projector's control panel and their functions. For basic operations of menus, refer to the projector's operation manual. 4-1. List of Menu Menus in parentheses are menus for our service personnel. Normally, these menus cannot be used. Main menu Title Select Configuration (Title Setup) Submenu "Title Memory Name" TEST Pattern Light Setup Adjust Lens Control Lens Position Focus Zoom Reset (FactoryDefault) Filter Cleaning (Setup) (Fan Usage) (Light Usage) (Phosphor) (Diffuser) (Pump) (Douser Count) Douser Setup Panel Key Lock Auto Key Lock 3D Reference Off Timer Message Silent Mode Installation (Note) (Option Slot) (Orientation) Lens Type (Note) Lens Calibrate (Note) Lens Center (Note) (Baudrate) (Memory) (Date/Time) (Fan Speed Mode) (Service) Light Lens Preset Button Preset Button 1-16 Description Selects the title of the signal to be projected. Selects the test pattern to be projected. Adjusts light source brightness. Adjusts the position of the projected screen. Adjusts the size and focus of the projected screen. Returns the settings to their default values. Selects between preset buttons and titles only, LAN settings only and all settings. Initializes the air filter usage time (for confirming the filter cleaning time). Initializes the usage time of the fan. Initializes the usage time of the light source. Initializes the usage time of the Phosphor. Initializes the usage time of the Diffuser. Resets the pump usage time. Resets the number of times the douser has been used. Sets the douser open/close state. Locks the buttons on the projector's control panel so that they cannot be operated. Enables or disables Auto Key Lock. Sets the input terminal for 3D video system. Sets the time until the projector power is turned off automatically. Sets the time to display the message indicating the air filter cleaning cycle. Sets whether the rear (SYSTEM/LIGHT) status indicator, buzzer, indicators on the projector's control panel, illumination, and LCD screen backlight are enabled or disabled. Configures the device installed in slot (only when the projector is in standby mode). Sets the projection method and cooling fan operating mode. Sets the type of lens (supports or does not support the lens memory function) attached to the projector. Performs calibration on lens that support the lens memory function (only when the projector power is turned on). Moves the lens shift position to the center (only when the projector power is turned on). Sets the PC control terminal (RS-232) data transmission speed (bps). Sets the date and time on the projector. Sets the cooling fan operating mode. Displays the Service man Menu. The content of the selected light memory (light output power value) can be overwritten with the current settings. The content of the selected lens memory can be overwritten with the current settings. Sets the title to be assigned to the preset buttons ( to buttons). Reference page 122 122 123 123 123 124 124 125 125 125 125 125 125 126 126 127 127 127 127 128 128 129 129 129 129 129 130 130 131 133 135 118