NEC PX-42VP4DP-A 42VP4/42VP4D - Page 30

Information Ⅵ When "AUTO PICTURE" is "OFF" IMAGE ADJUST ASPECT MODE : FULL V-POSITION H-POSITION V-HEIGHT H-WIDTH AUTO PICTURE : OFF FINE PICTURE PICTURE ADJ. SEL. ADJ. EXIT RETURN When Auto Picture is off, the Fine Picture and the Picture ADJ. items are displayed so that you can adjust them. Ⅵ Adjusting the Auto Picture ON The Picture ADJ., Fine Picture and Position adjustments are made automatically. Not available for digital ZOOM. OFF The Picture ADJ., Fine Picture and Position adjustments are made manually. * If FINE PICTURE won't be adjusted, set Auto Picture to OFF and adjust manually. Ⅵ Adjusting the position of the image V-POSITION ... Adjusts the vertical position of the image. H-POSITION ... Adjusts the horizontal position of the image. V-HEIGHT ....... Adjusts the vertical size of the image. (Except for STADIUM mode) H-WIDTH ......... Adjusts the horizontal size of the image. (Except for STADIUM mode) FINE PICTURE* .. Adjusts for flickering. PICTURE ADJ.* ... Adjusts for striped patterns on the image. * The PictureADJ. and Fine Picture features are available only when the "Auto Picture" is off. * TheAUTO PICTURE, FINE PICTURE and PICTURE ADJ. are available only for RGB signals. But, these features are not available for moving pictures on VIDEO, HD/DVD or RGB. Ⅵ Restoring the factory default settings Select "ALL RESET" under the OPTION1 menu. Note that this also restores other settings to the factory defaults except for Auto Picture. Option1 Settings Menu Setting the on-screen menu This sets the position of the menu, the display format (horizontal or vertical) etc. Example: Turning the DISPLAY OSM off Press the MENU/ENTER button on the remote control to display the MAIN MENU on the screen, then... 1. Use the v and w buttons to select "OPTION1", then press the MENU/ENTER button. The "OPTION1" menu appears. 2. Use the v and w buttons to select "OSM", then press the MENU/ENTER button. The "OSM" menu appears. 3. Use the v and w buttons to select "DISPLAY OSM". 4. To set the DISPLAY OSM to "OFF"... Use the ᮤ and ᮣ buttons to select "OFF". The mode switches as follows each time the ᮤ or ᮣ button is pressed: ON ↔ OFF DISPLAY OSM OSM ADJ. OSM ANGLE OSM ORBITER OSM : OFF : 1 : H : OFF SEL. ADJ. EXIT RETURN 5. Once the setting is completed... Press the EXIT button to return to the OPTION1 menu. To return to the main menu, press the EXIT button once more. Information Ⅵ DISPLAY OSM settings ON The on-screen menu appears. OFF .......... The on-screen menu does not appear. If you press the DISPLAY button on the remote control for more than 3 seconds the main menu will appear and can be set (although it is not ON). Ⅵ OSM ADJUST settings Adjusts the position of the menu when it appears on the screen. The position can be set between 1 to 6. Ⅵ OSM ANGLE settings Sets the display format (landscape "H" or portrait "V"). "H" OPTION1 1 / 3 OSM BNC INPUT : RGB D-SUB INPUT : RGB RGB SELECT : AUTO HD SELECT : 1080B INPUT SKIP : OFF ALL RESET : OFF NEXT PAGE SEL. MENU/ENTER OK EXIT RETURN 23