NEC PX-42VP4DP-A 42VP4/42VP4D - Page 8
How to Attach Options to the Plasma Monitor
View all NEC PX-42VP4DP-A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
How to Attach Options to the Plasma Monitor You can attach your optional mounts or stand to the plasma monitor in one of the following two ways: * While it is upright. (See Drawing A) * As it is laid down with the screen face down (See Drawing B). Lay the protective sheet, which was wrapped around the monitor when it was packaged, beneath the screen surface so as not to scratch the screen face. * Do not touch or hold the screen face when carrying the unit. • This device cannot be installed on its own. Be sure to use a stand or original mounting unit. (Wall mount unit, Stand, etc.) * See the inside of the cover page. • For correct installation and mounting it is strongly recommended to use a trained, authorized dealer. Failure to follow correct mounting procedures could result in damage to the equipment or injury to the installer. Product warranty does not cover damage caused by improper installation. Drawing A Drawing B * Use only the mounting kit or stand provided by manufacturer and listed under Options. Ventilation Requirements for Wall enclosure mounting To allow heat to disperse, leave space between surrounding objects as shown on the diagram 50mm (2") 50mm (2") below when installing. Wall 50mm (2") 50mm (2") 50mm (2") 1