NEC PX-42VP4DP-A 42VP4/42VP4D - Page 32

Information Ⅵ RGB SELECT modes One of these 6 modes must be selected in order to display the following signals correctly. AUTO Select the suitable mode for the specifications of input signals as listed in the table "Computer input signals supported by this system" on page 41. STILL To display VESA standard signals. (Use this mode for a still image from a computer.) MOTION .......... The video signal (from a scan converter) will be converted to RGB signals to make the picture more easily viewable. (Use this mode for a motion image from a computer.) WIDE1 When an 852 dot‫ ן‬480 line signal with a horizontal frequency of 31.7kHz is input, the image may be compressed horizontally. To prevent this, set RGB SELECT to WIDE1. WIDE2 When an 848 dot‫ ן‬480 line signal with a horizontal frequency of 31.0 kHz is input, the image may be compressed horizontally. To prevent this, set RGB SELECT to WIDE2. DTV Set this mode when watching digital broadcasting (480P). See page 41 for the details of the above settings. Ⅵ Restoring the factory default settings Select "ALL RESET" under the OPTION1 menu. Note that this also restores other settings to the factory defaults. Setting high definition images to the suitable screen size Use this procedure to set whether the number of vertical lines of the input high definition image is 1035 or 1080. Example: Setting the "1080B" mode to "1035I" Press the MENU/ENTER button on the remote control to display the MAIN MENU on the screen, then... 1. Use the v and w buttons to select "OPTION1", then press the MENU/ENTER button. The "OPTION1" screen appears. 2. Use the v and w buttons to select "HD SELECT". 3. To set the HD SELECT mode to "1035I" ... Use the ᮤ and ᮣ buttons to select "1035I". The mode switches as follows each time the ᮤ or ᮣ button is pressed: →1080B ↔ 1035I ↔ 1080A ← 4. Once the setting is completed ... Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more. Information Ⅵ HD SELECT modes These 3 modes are not displayed in correct image automatically. 1080B Standard digital broadcasts 1035I Japanese "High Vision" signal format 1080A Special Digital broadcasts (for example : DTC100) Setting the Input Skip When this is ON, signals which are not present will be skipped over and only pictures whose signals are being transmitted will be displayed. This setting is valid only for the INPUT SELECT button on the unit. Example: Set to "ON" Press the MENU/ENTER button on the remote control to display the MAIN MENU on the screen, then... 1. Use the v and w buttons to select "OPTION1", then press the MENU/ENTER button. The "OPTION1" screen appears. 2. Use the v and w buttons to select "INPUT SKIP". 3. To set the INPUT SKIP mode to "ON"... Use the ᮤ and ᮣ buttons to select "ON". The mode switches as follows each time the ᮤ or ᮣ button is pressed: OFF ↔ ON OPTION1 1 / 3 OSM BNC INPUT : RGB D-SUB INPUT : RGB RGB SELECT : AUTO HD SELECT : 1080B INPUT SKIP : ON ALL RESET : OFF NEXT PAGE SEL. ADJ. EXIT RETURN 4. Once the setting is completed... Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more. Information Ⅵ INPUT SKIP settings OFF Regardless of the presence of the signal, scan and display all signals. ON If no input signal is present, skip that signal. * "SETTING NOW" will appear during the input search. Ⅵ Restoring the factory default settings OPTION1 1 / 3 OSM BNC INPUT : RGB D-SUB INPUT : RGB RGB SELECT : AUTO HD SELECT : 1035 I INPUT SKIP : OFF ALL RESET : OFF NEXT PAGE SEL. ADJ. EXIT RETURN Select "ALL RESET" under the OPTION1 menu. Note that this also restores other settings to the factory defaults. 25