NEC PX-42VP4DP-A 42VP4/42VP4D - Page 35

Information Ⅵ PLE settings AUTO The brightness of the screen is adjusted automatically to suit the picture quality. LOCK1, 2, 3 .... Sets maximum brightness. The brightness level decreases in the order of LOCK 1, 2, 3. LOCK 3 provides minimum brightness. ORBITER Use this to set the picture shift. Example: Setting "ORBITER" to "AUTO1" Perform Steps 1-2 of LONG LIFE, then... 3. Use the v and w buttons to select "ORBITER". 4. Use the ᮤ and ᮣ buttons to select "AUTO1". The mode switches as follows each time the ᮤ or ᮣ button is pressed: →OFF ↔ AUTO1 ↔ AUTO2 ↔ MANUAL← LONG LIFE PLE : ORBITER : INVERSE : SCREEN WIPER : AUTO AUTO1 OFF OFF SEL. ADJ. EXIT RETURN Information Ⅵ ORBITER settings OFF Orbiter mode does not function. AUTO1 ......... The picture moves around the screen intermittently, making the picture smaller. AUTO2 ......... The picture moves around the screen intermittently, making the picture bigger. MANUAL ...... User can adjust the orbiter function (Horizontal Dot, Vertical Line and Time) manually. See the following explanation. Adjust the ORBITER function manually Set the amount of shift and the time between movement. Example: Setting so that the picture moves 2 dots horizontally and 3 lines vertically every 3 minutes. Perform Steps 1-3 of ORBITER, then... 4. Use the ᮤ and ᮣ buttons to select "MANUAL", then press the MENU/ENTER button. THE "ORBITER" screen appears. 5. Adjust the items using the vwᮤ and ᮣ buttons. The mode switches as follows each time the ᮤ or ᮣ button is pressed: • H-DOT →1 DOT ↔ 2 DOT 19 DOT ↔ 20 DOT← • V-LINE →1 LINE ↔ 2 LINE 19 LINE ↔ 20 LINE← • TIME →1 M ↔ 2 M ↔ 3 M ↔ 4 M ↔ 5 M← H-DOT V-LINE TIME ORBITER : : : 2 DOT 4 LINE 3 M SEL. ADJ. EXIT RETURN Information Ⅵ ORBITER Function settings H-DOT .......... Moves from 1 to 20 dots in the horizontal direction. V-LINE .......... Moves from 1 to 20 lines in the vertical direction. TIME Interval of 1~5 minutes. INVERSE Use this to set the inverse mode or to display a white screen. Example: Setting "INVERSE" to "WHITE" Perform Steps 1-2 of LONG LIFE, then... 3. Use the v and w buttons to select "INVERSE". 4. Use the ᮤ and ᮣ buttons to select "WHITE". The mode switches as follows each time the ᮤ or ᮣ button is pressed: →OFF ↔ ON ↔ WHITE← LONG LIFE PLE : ORBITER : INVERSE : SCREEN WIPER : AUTO OFF WHITE OFF SEL. ADJ. EXIT RETURN Information Ⅵ INVERSE Settings ON ......... The picture is displayed alternately between positive image and negative image. You can set the time by pressing the MENU/ ENTER button while "ON" is set. OFF ....... Inverse mode does not function. WHITE ...The entire screen turns white. You can set the time by pressing the MENU/ ENTER button while "ON" is set. 28