NEC PX-42XR3A 42VR5_42XR3 UM - Page 13
Wide Screen Operation with, Computer Signals
View all NEC PX-42XR3A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Wide Screen Operation with Computer Signals Switch to the wide screen mode to expand the 4 : 3 image to fill the entire screen. 1. Press the WIDE button on the remote control. 2. Within 3 seconds ... Press the WIDE button again. The screen size switches as follows: → NORMAL → ANAMORPHIC → ZOOM NORMAL size screen (4:3 or SXGA 5:4) The picture has the same size as the normal computer image. ANAMORPHIC size screen Information Ⅵ Supported resolution See page 7 of Model Information for details on the display output of the various VESA signal standards supported by the monitor. Ⅵ When 852 (848) dot ן480 line wide VGA* signals with a vertical frequency of 60 Hz and horizontal frequency of 31.7 (31.0) kHz are input Select an appropriate setting for RGB SELECT mode referring to the"Table of Signals Supported" on page 7 of Model Information. * "VGA", "SVGA" and "SXGA" are registered trademarks of IBM, Inc. of the United States. Note: Do not allow the displayed in 4:3 mode for an extended period. This can cause a phosphor burn-in. The image is expanded in the horizontal direction. ZOOM size screen When wide signals are input. ANAMORPHIC size screen 13