NEC PX-42XR3A 42VR5_42XR3 UM - Page 9

Rear View/ Terminal Board C D E F G H I AB A AC IN Connect the included power cord here. B EXT SPEAKER L and R Connect speakers (optional) here. Maintain the correct polarity. Connect the (positive) speaker wire to the EXT SPEAKER terminal and the (negative) speaker wire to the EXT SPEAKER terminal on both LEFT and RIGHT channels. Please refer to your speaker's owner's manual. C VIDEO1, 2, 3 (BNC, RCA, S-Video) Connect VCR's, DVD's or Video Cameras, etc. here. D AUDIO1, AUDIO2, AUDIO3 These are audio input terminals. The input is selectable. Set which video image to allot them from the audio menu screen. E DVD1 / HD1 Connect DVD's, High Definition or Laser Discs, etc. here. F DVD2/ HD2, RGB2 DVD2/ HD2: You can connect DVDs, High Definition sources, Laser Discs, etc. here. This input can be set for use with an RGB or component source. (see page 21) RGB2: You can connect an analog RGB signal and the syncronization signal. G RGB1 (D-Sub) Connect an analog RGB signal from a computer, etc. here. H DVD3/HD3, RGB3 (DVI) Connect a digital signal (TMDS) from a source with a DVI output. This input can be set for use with an RGB3 or DVD3/ HD3 source. (see page 22) I EXTERNAL CONTROL (D-Sub) This terminal is used when operating and controlling the monitor externally (by external control). 9