NEC PX-61XR3A 50XR4/61XR3 UM - Page 13

Wide Screen Operation with Computer Signals Switch to the wide screen mode to expand the 4 : 3 image to fill the entire screen. 1. Press the WIDE button on the remote control. 2. Within 3 seconds ... Press the WIDE button again. The screen size switches as follows: → NORMAL → ANAMORPHIC → ZOOM When displaying enhanced split screen: NORMAL ↔ ANAMORPHIC NORMAL size screen (4:3 or SXGA 5:4) Information Ⅵ Supported resolution See page 7 of Model Information for details on the display output of the various VESA signal standards supported by the monitor. Ⅵ When 852 (848) dot ‫ ן‬480 line wide VGA* signals with a vertical frequency of 60 Hz and horizontal frequency of 31.7 (31.0) kHz are input Select an appropriate setting for RGB SELECT mode referring to the"Table of Signals Supported" on page 7 of Model Information. * "VGA", "SVGA" and "SXGA" are registered trademarks of IBM, Inc. of the United States. Note: Do not allow the displayed in 4:3 mode for an extended period. This can cause a phosphor burn-in. The picture has the same size as the normal computer image. ANAMORPHIC size screen The image is expanded in the horizontal direction. ZOOM size screen When wide signals are input. ANAMORPHIC size screen 13