NaceCare ETB1120 ETB1120 Owners Manual - Page 8
Quick Set-Up Guide
View all NaceCare ETB1120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
! 1 Quick Set-Up Guide PLEASE READ BEFORE COMMENCING ANY OPERATION. After the removal of all the packaging, carefully open and check the contents. ! Ensure the Batteries are charged before use. Using the handle position lever (Fig 1), move the handle into the upright position. (Fig 2). 2 3 4 Fig 1 Connect 24V power supply to the machine Fig 2 Fig 4 Fig 3 Place the top tank (waste water) into the machine (Fig 5) and connect the vacuum and floor tool hose to the separator (Fig 6). Fig 5 Fit the isolator key and switch the machine on (Fig 7). Fig 6 Fig 7 5 Fig 8 Fill the bottom tank (Clean Water) from a tap or hose pipe using the Flexi-Fill pipe fitted to the filler cap (Fig 8). Add Non foaming cleaning fluid as required (See page 11). The ETB 1120 has a water capacity of 11 gal Note: Great care must be taken to ensure that contaminants (leaves, hair, dirt, etc.) are not allowed to enter the clean-water tank during the filling process. If using a bucket or similar, ensure it is always clean and free from debris. 8