NaceCare HGB817 Owners Instructions - Page 6

Machine Set-up Guide ! ALWAYS ENSURE THAT THE MACHINE IS SWITCHED OFF BEFORE MAKING ANY ADJUSTMENTS ! Fitting the Brush / Pad / Turn on water 450mm / 550mm (17"/20")Brush or a Pad. Featuring the Nulock brush system. The brush is simply pushed and twisted to lock, making fitting and removal a simple process. Slide the brush / pad under the brush deck. Fit the brush / pad onto the Nulock drive chuck, twist to lock the brush / pad in place. Safety gloves are recommended for the changing of used brushes. Turn on the clean water tap. Fitting the Floor Tool The floor tool has been designed for quick fitting, allowing easy squeegee blade replacement and a safety knock-off feature if the floor tool gets snagged, whilst in transit. NOTE: It is easier to fit the floor tool if the weight of the machine is resting on the brush. Ensure the brush is fitted first. Fit the floor tool and retain using the detent pins. Push waste collection pipe onto the floor tool; ensure a tight fit. Raise the floor tool for transit or lower for cleaning operation using the lifting handle fitted to the back of the machine. For fitting the floor tool blades (See Page 12). 6 www.numatic.co.uk