NaceCare HGB817 Owners Instructions - Page 9

Raising/Lowering the Floor Tool After preparing the floor (see previous section), we are now ready to set the controls to suit the cleaning conditions. Before any settings can be applied, ensure the brush deck is lowered. Move the floor tool lever to its lower position. NOTE: Do not pull the machine backwards with the floor tool in the lowered position, this could possibly damage the blades. Machine Operation Raising/Lowering the Brush Deck To tip the deck into the down position (Operating mode). Press in the brush deck locking pin (Fig.A) and rotate the brush deck (Fig.B & C). To change to brush deck up position, (Transit mode) simply lift the deck and the spring loaded locking pin will activate to hold the deck up. A B C Setting the Cleaning Controls To start: hold down either trigger and press the yellow On / Off Switch once o o Hour meter and battery power. Vacuum On / Off Water On / Off T 01460 68600 9