NaceCare TTB516 TTB1840 / TTB516 Owners Manual - Page 17

Changing the Floor-Tool Blades ! ALWAYS ENSURE THAT THE BATTERY IS DISCONNECTED PRIOR TO ANY MAINTENANCE ! To change the floor-tool, firstly swing the floor-tool clear of the machine (Fig 41). Fig 41 Fig 42 Undo the two floor-tool retaining knobs (Fig 42). Fig 43 Fig 44 Fig 45 Unscrew the four knobs securing the blade holder (Fig 43). Remove the blade holder (Fig 44). Replace the Squeegee blades using (606261) replacement blade set (Fig 45), fitting the blades on to the moulded location lugs. Refitting the Floor Tool Blades Refit the blade holder, retain using the two outer knobs (Fig 46) Ensure the slotted blade goes to the front of the floor-tool (Fig 47). Note: The blades are designed to be reversible, thus extending their useful working life. Fig 46 Fig 47 Refit the floor-tool using the two central knobs to the floor-tool. Refer to Page 9 for fitting instructions. 1. Floor-tool main body 2. Blade carrier 3. Rear blade 4. Front blade (slotted) 5. Retaining Knobs x 4 1 2 5 Use Genuine NUMATIC spare parts. use 3 Replacement Blade Set (606261) 4 17 233969 / 01/13 (A20)