NaceCare TTB516 TTB1840 / TTB516 Owners Manual - Page 9
Machine Set-Up
View all NaceCare TTB516 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Machine Set-Up ! ALWAYS ENSURE THAT THE BATTERY IS DISCONNECTED BEFORE MAKING ANY ADJUSTMENTS ! Fitting the brushes Featuring the Nulock brush system. The brush is simply pushed and twisted to lock, making fitting and removal a simple process. Only use manufacturer supplied brushes. This machine requires a 16 inch brush or a 16 inch pad. Slide the brush / pad under the brush deck (Fig 6). Fig 6 Fit the brush / pad onto the Nulock drive chuck, twist to lock the brush / pad in place (Fig 7). Fig 7 Safety gloves are recommended for the changing of used brushes. Fitting the Floor Tool The floor tool has been designed for quick fitting, allowing easy squeegee blade replacement and a safety knock-off feature if the floor tool gets snagged, whilst in transit. Swing the floor-tool carrier to the side of the machine (Fig 8). Fig 8 Note: It is easier to fit the floor-tool if the weight of the machine is resting on the brush. Ensure the brush is fitted first. Secure to the carrier using the two knobs fitted to the floor-tool carrier (Fig 9) - (Fig 9a). Do not over tighten the retaining knobs. Fig 9 9 Fig 9a 233969 / 01/13 (A20)