NaceCare TTB516 TTB1840 / TTB516 Owners Manual - Page 20

Trouble-Shooting PROBLEM Machine will not operate CAUSE Missing or blown fuses Battery not connected Low battery charge SOLUTION Fit or replace fuse (page 8) Connect battery (page 8) Charge batteries (page 19/21) Vacuum will not operate Poor water pick-up Vacuum not turned on Waste-water tank full Clogged / blocked vacuum hose Loose hose connections Debris basket filter clogged/blocked Separator filter clogged / blocked Poor separator seal Damaged separator seal Damaged / split vacuum hose Damaged floor-tool blades Low battery charge Turn on vacuum (page 17) Empty waste-water tank (page 17) Remove and clean (page 17) Push tight connections (page 17) Remove and clean (page 17) Remove and clean (page 17) Clean and refit (page 17) Renew (contact service dept) Renew (contact service dept) Renew (contact service dept) Recharge batteries (page 19 /21) No brush / scrub function Little or no water flow Machine just 'stops' while operating No brushes fitted Brush overloaded Clean-water tank empty Clean-water tank filter blocked/ clogged Incorrect water flow setting To much load on the brush system Blown fuse in Battery pack Check and fit (page 10) Reset machine (page 14 fig 27d) Fill clean-water tank (page 11) Remove and clean (page 17) Adjust tap as desired (page 14) Reset the machine and decrease the brush load to best suit the floor type (page 14. fig 27d) Replace 40 Amp fuse (page 18) Specifications Brush Motor Vac Motor Brush Sizes Pad sizes 400W 24V 300W 16" 16" Weight 52 Kg Protection Class IPX4 Model TTB-516 Run Time per battery pack Hi - 35 mins Lo - 45 mins Power 2 x 12V (24V) 18Ahr Area Performance Fluid Flow Brush / Pad per battery (Tap at 45') Pressure Speed Recharge Cleaning Hand Arm time Speed Vibration Noise Size pack 1050m2 0.09 gpm 27.4/ Hi-150 rpm (60 mins) 26.2 g/cm2 Lo-130rpm 6 hrs Hi-70.3 dB(A) 0-4.2Kph 0.6 m/s2 Lo-68.2 dB(A) 850mmx 1132mmx 520mm 20 233969 / 01/13 (A20)