Naxa NAS-3072 NAS-3072 manual - English - Page 5

Using Bluetooth® Mode Pairing a Device with Bluetooth® A device must be paired with the speaker before using them together for the first time. When the speaker is paired and connected to a device, the speaker will beep and the Status LED [9] will blink blue slowly. LLTo enter pairing mode when the speaker is already on, turn it off and then back on again. Make sure Bluetooth is enabled on your device before attempting to pair it. Bluetooth® Mode Controls When you turn on the speaker, it will automatically search for a paired device. If it does not detect a paired device, it will switch to Pairing mode (the Status LED will [9] flash blue and the speaker will bee twice). Then: 1. Use your device to search for nearby Bluetooth connections. (This function is usually in the Bluetooth settings menu; refer to your device's instruction manual to learn more.) When the speaker is connected to a Bluetooth® device: To do this... Start, pause, or resume audio playback Skip to the previous track Skip to the next track Adjust the volume level ...do this Press . Press . Press . Turn the Volume dial. 2. The speaker will announce itself as NAXA NAS3072. Select it from the list of devices. 3. If your device asks for a passcode, use "0000" to complete the pairing process. LLYou may also use your device to control playback. Some devices may not support remote Bluetooth® controls. www.naxa.com Page 5