Naxa NAS-3072 NAS-3072 manual - English - Page 7

Automatic Station Scan Use the station scan feature to find stations within broadcast reception range and save them to preset memory. 1. Press [5] once. The sound bar will search for and store stations automatically. 4. Set the device volume to 80% of its maximum and then start playback. 5. Turn the volume dial [8] to increase the volume gradually to a comfortable level. LLUse the connected AUX device to control all functions in AUX mode. The speaker can only be used to adjust the volume. Using the AUX Input Connector Connect devices without Bluetooth® by using the AUX connection. A 3.5mm stereo patch cable is required to make this connection. 1. Press MODE [11] to switch the speaker to AUX mode. 2. Use the included AUX cable to connect the device's headphone or line-out jack to the AUX connector [2] found on the side of the speaker. 3. Turn on the device and the speaker. Lower the volume on both. www.naxa.com Page 7