Naxa NAS-3072 NAS-3072 manual - English - Page 6

Using USB & SD Mode Using FM Radio Mode Install a USB drive or SD memory card and then press MODE [11] to set the active mode to USB or SD. Install a compatible USB drive or memory card with music files on it. •• The speaker will automatically detect the drive or card and the Status LED [9] will light blue. •• The speaker will automatically switch modes, and attempt to play music from the drive or card. LLPlease refer to the Specifications section to learn more about compatibility. Press MODE [11] to set the active mode to FM. LLYou must connect the included AUX cable to the AUX connector [2] in order to use the FM radio. The AUX connector is also used for FM radio reception. To optimize reception, extend the connected AUX cable and adjust its position. FM Radio Controls To do this... ...do this To do this... ...do this Start, pause, or resume playback. Press . Skip to the next track. Press . Skip to the previous track. Press . Change the active mode (Bluetooth®, Press MODE. SD, USB, FM, and AUX). Tune to the next station Tune to the previous station. Scan for stations and auto save them to preset memory Press . Press . Press . Page 6 Naxa Electronics