Netgear AC750-Dual User Manual - Page 85
Set Up a Bridge for a VLAN Tag Group, ADVANCED > Advanced Setup > VLAN / Bridge Settings
View all Netgear AC750-Dual manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
AC750 WiFi Router Model R6020 The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > VLAN / Bridge Settings. The VLAN / Bridge Settings page displays. 5. Select the Enable VLAN Tag check box. The page expands. 6. Select the By bridge group radio button. 7. Select a Wired Ports check box or a Wireless check box. • If your device is connected to an Ethernet port on the router, select the Wired Devices check box that corresponds to the Ethernet port on the router to which the device is connected. • If your device is connected to your router's WiFi network, select the Wireless check box that corresponds to the router's WiFi network to which the device is connected. Note: You must select at least one Wired Devices or Wireless check box. You can select more than one check box. 8. Click the Apply button. Your settings are saved. Set Up a Bridge for a VLAN Tag Group If the devices that are connected to the router's Ethernet LAN ports or WiFi network include an IPTV device, your ISP might require you to set up a bridge for a VLAN tag group for the router's Internet interface. If you are subscribed to an IPTV service, the router might require VLAN tags to distinguish between the Internet traffic and the IPTV traffic. A bridge with a VLAN tag group prevents Manage the WAN and LAN 85 Network Settings User Manual