Home » Netgear Manuals » Bridges & Routers » Netgear AC750-Dual » Manual Viewer

Netgear AC750-Dual User Manual - Page 97

Erase the Settings, admin, password, ADVANCED > Administration > Backup Settings, Erase

Add to My Manuals
Save this manual to your list of manuals

Page 97 highlights

AC750 WiFi Router Model R6020 WARNING: To avoid the risk of corrupting the firmware, do not interrupt the reset. For example, if you are connected to the router's web page, do not close the browser, click a link, or load a new page. Do not turn off the router. Wait until the router finishes restarting and the Power LED turns solid green. Erase the Settings CAUTION: This process erases all settings that you configured in the router. To erase the settings: 1. Launch a web browser from a computer or mobile device that is connected to the network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Administration > Backup Settings. The Backup Settings page displays. 5. Click the Erase button. The configuration is reset to factory default settings. When the reset is complete, the router reboots. This process takes about two minutes. WARNING: To avoid the risk of corrupting the firmware, do not interrupt the reset. For example, do not close the browser, click a link, or load a new page. Do not turn off the router. Wait until the router finishes restarting and the Power LED turns solid green. Manage the Router 97 User Manual

Section	Page
Contents	3
1. Hardware Overview of the Router	8
Unpack Your Router	9
LED Descriptions	10
Ports, Buttons, and Connectors on the Back Panel	10
Router Label	12
Position the Router	12
Cable Your Router	13
2. Connect to the Network and Access the Router	15
Connect to the Router	16
Connect to the Router Through an Ethernet Cable	16
Join the WiFi Network of the Router	16
Manual Method	16
Wi-Fi Protected Setup Method	17
Types of Logins	18
Use a Web Browser to Access the Router	18
Automatic Internet Setup	18
Log In to the Router	20
Change the Language	20
3. Specify Your Internet Settings	21
Use the Internet Setup Wizard	22
Manually Set Up the Internet Connection	22
Specify an Internet Connection Without a Login	22
Specify an Internet Connection That Uses a Login and PPPoE Service	24
Specify an Internet Connection That Uses a Login and PPTP Service	26
Specify an Internet Connection That Uses a Login and L2TP Service	27
Specify an IPv6 Internet Connection	29
IPv6 Internet Connections and IPv6 Addresses	29
Use Auto Detect for an IPv6 Internet Connection	30
Use Auto Config for an IPv6 Internet Connection	31
Set Up an IPv6 6to4 Tunnel Internet Connection	33
Set Up an IPv6 Pass-Through Internet Connection	34
Set Up a Fixed IPv6 Internet Connection	35
Set Up an IPv6 DHCP Internet Connection	36
Set Up an IPv6 PPPoE Internet Connection	37
Manage the MTU Size	39
MTU Concepts	39
Change the MTU Size	40
4. Control Access to the Internet	42
Enable access control to allow or block access to the Internet	43
Manage network access control lists	44
Use Keywords to Block Internet Sites	45
Set Up Blocking	45
Remove a Keyword or Domain From the Blocked List	46
Remove All Keywords and Domains From the Blocked List	47
Specify a Trusted Computer	47
Set Up a Schedule for Keyword Blocking and Outbound Firewall Rules	48
5. Manage the Basic WiFi Network Settings	50
Manage the Basic WiFi Settings and WiFi Security of the Main Network	51
View or Change the Basic WiFi Settings and WiFi Security Settings	51
Configure WEP Legacy WiFi Security	57
Configure WPA/WPA2 Enterprise WiFi Security	59
Use WPS to Add a Device to the WiFi Network	61
Use WPS With the Push Button Method	61
Use WPS With the PIN Method	62
Manage the Basic WiFi Settings and WiFi Security of the Guest Network	63
Enable or Disable the WiFi Radios	67
6. Manage the WAN and LAN Network Settings	68
View or Change WAN Settings	69
Set Up a Default DMZ Server	70
Manage IGMP Proxying	71
Manage VPN Pass-Through	71
Manage NAT Filtering	72
Manage the SIP Application-Level Gateway	73
Manage the LAN IP Address Settings	74
Manage the Router Information Protocol Settings	75
Manage the DHCP Server Address Pool	76
Manage Reserved LAN IP Addresses	77
Reserve a LAN IP Address	77
Change a Reserved IP Address	78
Remove a Reserved IP Address Entry	78
Disable the Built-In DHCP Server	79
Change the Router’s Device Name	80
Set Up and Manage Custom Static Routes	81
Set Up a Static Route	81
Change a Static Route	83
Remove a Static Route	83
Set Up a Bridge for a Port Group or VLAN Tag Group	84
Set Up a Bridge for a Port Group	84
Set Up a Bridge for a VLAN Tag Group	85
Improve Network Connections With Universal Plug-N-Play	87
7. Manage the Router	89
Update the Firmware of the Router	90
Check for New Firmware and Update the Router	90
Manually Upload New Firmware and Update the Router	91
Change the admin Password	92
Set Up Password Recovery	93
Recover the admin Password	94
Manage the Configuration File of the Router	94
Back Up the Settings	94
Restore the Settings	95
Return the Router to Its Factory Default Settings	96
Use the Reset Button	96
Erase the Settings	97
View the Status and Statistics of the Router	98
View Information About the Router and the Internet and WiFi Settings	98
Display Internet Port Statistics	99
Check the Internet Connection Status	100
Manage the Activity Log	101
View, Email, or Clear the Logs	101
Specify Which Activities Are Logged	102
View Devices Currently on the Network	102
8. Manage the Advanced WiFi Features	104
Set Up a WiFi Schedule	105
Manage the WPS Settings	106
Manage Advanced WiFi Settings	107
Use the Router as a WiFi Access Point Only	108
9. Manage Port Forwarding and Port Triggering	110
Manage Port Forwarding to a Local Server for Services and Applications	111
Forward Incoming Traffic for a Default Service or Application	111
Add a Port Forwarding Rule With a Custom Service or Application	112
Change a Port Forwarding Rule	113
Remove a Port Forwarding Rule	114
Application Example: Make a Local Web Server Public	115
How the Router Implements the Port Forwarding Rule	115
Manage Port Triggering for Services and Applications	116
Add a Port Triggering Rule	116
Change a Port Triggering Rule	118
Remove a Port Triggering Rule	118
Specify the Time-Out for Port Triggering	119
Disable Port Triggering	120
Application Example: Port Triggering for Internet Relay Chat	120
10. Troubleshooting	122
Reboot the Router From Its Web Interface	123
Quick Tips	123
Sequence to Restart Your Network	123
Check Ethernet Cable Connections	124
WiFi Settings	124
Network Settings	124
Troubleshoot With the LEDs	124
Standard LED Behavior When the Router Is Powered On	124
Power LED Is Off or Blinking	125
Power LED Stays Amber	125
Internet or Ethernet LEDs Are Off	125
WiFi LED Is Off	126
You Cannot Log In to the Router	126
You Cannot Access the Internet	127
Check the WAN IP Address	127
Troubleshoot PPPoE	128
Troubleshoot Internet Browsing	129
Changes Are Not Saved	130
Troubleshoot WiFi Connectivity	130
Troubleshoot Your Network Using the Ping Utility	131
Test the LAN Path to Your Router	131
Test the Path From Your Computer to a Remote Device	132
A. Supplemental Information	133
Factory Settings	134