Netgear AX2400 User Manual - Page 12
Rear panel, Router label
View all Netgear AX2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Nighthawk AX2400 WiFi 6 Router Rear panel The following figure shows the rear panel connectors and buttons. Figure 3. Rear panel The rear panel contains the following components: 1. Ethernet ports 1-4. Four Gigabit Ethernet RJ-45 LAN ports. Use these ports to connect LAN devices to the router. 2. Internet port. One Gigabit Ethernet RJ-45 WAN port to connect the router to an Internet modem such as a cable modem or DSL modem. 3. DC power connector. Connect the power adapter that came in the product package to the DC power connector. 4. Power On/Off button. Press the Power On/Off button to provide power to the router. 5. Reset button. Pressing the Reset button resets the router. If the Reset button is pressed for at least 10 seconds, the Power LED blinks amber and the router resets its factory default settings. When the router finishes resetting its factory default settings, the Power LED lights solid white. 6. USB 3.0 port. Use the USB 3.0 port to connect USB storage device. Router label The router label shows the login information, WiFi network name (SSID), password, serial number, and MAC address. Figure 4. Router label Hardware Setup 12 User Manual