Netgear DG834GUK DG834Gv4 Reference Manual - Page 128
The following table explains the fields in the VPN Manual Policy screen., Table 6-7.
View all Netgear DG834GUK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
ADSL2+ Modem Wireless Router DG834G Reference Manual The following table explains the fields in the VPN Manual Policy screen. Table 6-7. VPN Manual Policy Fields and Settings Fields and Settings General The DG834G v4 VPN tunnel network connection fields. Local LAN The remote VPN endpoint must have these IP addresses entered as its remote addresses. Policy Name Remote VPN Endpoint Subnet Mask Single PC - no Subnet Single/Start IP Address Finish IP Address Description Enter a unique name to identify this policy. This name is not supplied to the remote VPN endpoint. It is used only to help you manage the policies. • The remote VPN endpoint must have this VPN gateway's address entered as its remote VPN endpoint. • If the remote endpoint has a dynamic IP address, select Dynamic IP address. No address data input is required. You can set up multiple remote dynamic IP policies, but only one such policy can be enabled at a time. Otherwise, select an option (IP address or domain name) and enter the address of the remote VPN endpoint to which you want to connect. Enter the network mask. Select this option if there is no LAN (only a single PC) at the remote endpoint. If this option is selected, no additional data is required. • Enter the IP address for a single address, or the starting address for an address range. A single adress setting is used when you want to make a single server on your LAN available to remote users. A range must be an address range used on your LAN. • Any. The remote VPN endpoint may be at any IP address. For an address range, enter the finish IP address. This must be an address range used on your LAN. 6-42 v2.0, September 2007 Virtual Private Networking