Netgear DG834GUK DG834Gv4 Reference Manual - Page 26
ADSL Settings, How the Internet Connection Works
View all Netgear DG834GUK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
ADSL2+ Modem Wireless Router DG834G Reference Manual ADSL Settings Note: For information about how to install ADSL filters, see the NETGEAR Router Setup Manual. The default ADSL settings of your modem router work fine for most ISPs. However, some ISPs use a specific multiplexing method and virtual circuit number for the virtual path identifier (VPI) and virtual channel identifier (VCI). Note: You must use the Setup Wizard to select the correct country for the default ADSL settings to work. If your ISP provided you with a multiplexing method or VPI/VCI number, then enter the setting: 1. From the main menu, select ADSL Settings. 2. In the Multiplexing Method drop-down list, select LLC-based or VC-based. 3. Type a number between 0 and 255 for the VPI. The default is 8. 4. Type a number between 32 and 65535 for the VCI. The default is 35. 5. Click Apply. How the Internet Connection Works Your modem router is now configured to provide Internet access for your network. Your modem router automatically connects to the Internet when one of your computers requires access. It is not necessary to run a dialer or login application such as dial-up networking or Enternet to connect, log in, or disconnect. The modem router performs these functions automatically as needed. To access the Internet from any computer connected to your modem router, launch an Internet browser such as Microsoft Internet Explorer or Netscape Navigator. You should see the modem router's Internet LED blink, indicating communication to the ISP. The browser should begin to display a Web page. 1-10 Configuring Your Internet Connection v2.0, September 2007