Netgear DG834Gv3 DG834Gv3 Setup Manual - Page 6
The Router’s Front Panel, Table 1-1., LED Descriptions - setup
View all Netgear DG834Gv3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Wireless ADSL Modem Router Setup Manual The Router's Front Panel The wireless ADSL modem router front panel shown below contains status LEDs. 1 2 Figure 1-1 3 4 5 You can use the LEDs to verify various conditions. Table 1-1 describes each LED. Table 1-1. LED Descriptions Label Activity On 1. Power Off On 2. Test Off Blink -- Amber 3. Internet On -- Green Blink -- Green On 4. Wireless Off 5. LAN On (Green) Blink (Green) On (Amber) Blink (Amber) Off Description Power is supplied to the router. Power is not supplied to the router. The system is initializing. The system is ready and running. Indicates ADSL training. The Internet port has detected a link with an attached device. Data is being transmitted or received by the Internet port. Indicates that the Wireless port is initialized. The Wireless Access Point is turned off. The Local port has detected a link with a 100 Mbps device. Data is being transmitted or received at 100 Mbps. The Local port has detected a link with a 10 Mbps device. Data is being transmitted or received at 10 Mbps. No link is detected on this port. 1-2 Connecting the Router to the Internet v1.1, 2006-2