Netgear DG834v3 DG834v3 Reference Manual - Page 63
Connect Automatically, as Required, Disable Port Scan and DOS Protection
View all Netgear DG834v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Reference Manual for the ADSL Modem Router DG834 v3 2. From the Main Menu, under Advanced, click the WAN Setup link to view the page shown in Figure 5-1: Figure 5-1 3. Select the Default DMZ Server check box. 4. Type the IP address for that server. 5. Click Apply to save your changes. Connect Automatically, as Required Normally, this option should be enabled, so that an Internet connection will be made automatically, whenever Internet-bound traffic is detected. If this causes high connection costs, you can disable this setting. If disabled, you must connect manually, using the sub-screen accessed from the "Connection Status" button on the Status screen. If you have an "Always on" connection, this setting has no effect. Disable Port Scan and DOS Protection The Firewall protects your LAN against Port Scans and Denial of Service (DOS) attacks. This should be disabled only in special circumstances. Advanced Configuration 5-3 v1.1, October 2006