Netgear FA310 FA310 Installation Guide - Page 5
Connect the Network Cables, Normal MDI-X and Uplink MDI with a Normal/Uplink push - card
View all Netgear FA310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Connect the Network Cables Using the appropriate UTP cable, connect any port on a network hub to the port on the network card. Note: One of the ports on NETGEAR hubs is switchable between Normal (MDI-X) and Uplink (MDI) with a Normal/Uplink push button. If you are using this switchable port on a NETGEAR hub to connect to a PC or the network card, make sure the Normal/Uplink push button is set to Normal. PC with network card installed Power adapter PC with network card installed Printer (optional) Hub RJ-45 connector RJ-45 connector Category 5 10/100 Mbps UTP cables* *Use the cables provided or any Category 5 UTP cable. Maximum length = 100 meters (300 feet) 7995FB Model FA310TX Network Card Installation Guide
Model FA310TX Network Card Installation Guide
Using the appropriate UTP cable, connect any port on a network hub to the port
on the network card.
Note:
One of the ports on NETGEAR hubs is switchable between
Normal (MDI-X) and Uplink (MDI) with a Normal/Uplink push
button. If you are using this switchable port on a NETGEAR hub to
connect to a PC or the network card, make sure the Normal/Uplink
push button is set to Normal.
Connect the Network Cables
7995FB
RJ-45
connector
RJ-45
connector
PC with network
card installed
Power adapter
PC with network
card installed
Printer
(optional)
*Use the cables provided or any Category 5 UTP cable.
Maximum length = 100 meters (300 feet)
Category 5 10/100 Mbps UTP cables*
Hub