Netgear FS728TP FS728TP User Manual - Page 117
QoS > CoS > Basic > Bandwidth, Interface, Ingress Rate Limit Status
UPC - 606449050226
View all Netgear FS728TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual To define bandwidth settings: 1. Click QoS > CoS > Basic > Bandwidth. The Bandwidth screen displays: Figure 5-4 The Bandwidth screen contains the following fields: • Interface - Displays the ports for which the bandwidth settings are displayed. • Ingress Rate Limit Status - Select whether rate limiting is defined on the interface. The possible field values are: - Enable - Enable ingress rate limiting on the interface. - Disable - Disable ingress rate limiting on the interface. • Ingress Rate Limit - Enter the rate limit in kilobits per second. The possible field range is 70 to the maximum port speed. FE ports have a maximum speed of 100000 kilobits per second and GE ports have a maximum speed of 1000000 kilobits per second. The default value is 70 kilobits per second. • Egress Shaping Rates Status - Select whether egress shaping is defined on the interface. The possible field values are: - Enable - Enable egress shaping rate on the interface. 5-6 Configuring QoS v1.0, December 2007